HP-UX Virtual Partitions Ordering and Configuration Guide (May 2012)

Table 26 vPars A.05.07 or later Minimum Required Card-Related Firmware for Superdome 2 (EFI,
ROM, and Boot Code) (continued)
Flash Utility
Version
Flash
Utility
Boot Code
File
Network
(NIC) EFI
Firmware
Version
FC/SCSI/RAID
HBA
Firmware
Version
FC/SCSI/RAID
EFI Driver
VersionCard TypeDescription
Card
Product
Number
————4.3.01—NetworkingHP PCIe dual
port, 4GB,
Fiber Channel
(FC), and
dual-port
1000Base-X
adapter
AD393
———2.12A53.104.356.6—NetworkingHP PCIe
dual-port,
8Gb FC and
2p 1/10GbE
Adapter
AT094A
———5.0.1.193.104.356.6—NetworkingHP PCIe 2
port
(CN1100E)
FlexFabric
Adapter
AT111A
———2.12.A53.104.356.6—NetworkingHP Integrity
NC552SFP
2P 10GbE
Adapter
AT118A
————5.16b0—SASHP PCIe SAS
SA P411
256MB Ctlr
AM311A
————5.16b0—SASHP PCIe SAS
SA P812 1G
Flash Cache
AM312A
NOTE: AT094A, AT111A and AT118A have a minimum System Firmware requirement of
v2.51.102.
Table 27 vPars A.05.08 and A.05.09 Minimum Required Card-Related Firmware (EFI, ROM, and
Boot Code)
Flash
Utility
Version
Flash
UtilityBoot Code File
Network
(NIC) EFI
Firmware
Version
FC/SCSI/RAID
HBA
Firmware
Version
FC/SCSI/RAID
EFI Driver
VersionDescription
Card
Product
Number
1
B.00.44FCFUPDATE5.2.51
2
6.2.21——PCIe 2-port
10GbE-SR
AM225A
B.00.44FCFUPDATE5.2.51
3
6.2.21——PCIe 2-port
10GbE-LR
AM232A
B.00.44FCFUPDATE5.2.51
4
6.2.21——PCIe 2-port
10GbE-Cu
AM233A
1
In addition to the cards supported for vPars A.05.07, three new cards listed here are supported for vPars A.05.08.
2
HP recommends that you update boot code to version 5.2.70.
3
HP recommends that you update boot code to version 5.2.70.
4
HP recommends that you update boot code to version 5.2.70.
60 Supported Configurations