HP-UX Virtual Partitions Ordering and Configuration Guide (v09.06.16)

4E B0000147 B X X X 2 10 HP 2 Gb Fibre Channel Driver S=0E B=D4 D=1 F=0 I=0

4F 01030000 ? X X - - - LSI Logic Ultra320 SCSI Driver S=0A B=2B D=4 F=0 I=0

50 00002160 ? - - - - - Intel(R) PRO/1000 v2.16 EFI-64 S=0A B=2B D=6 F=0 I=0

This line shows the current version for the HP 2 GB Fibre Channel Driver as 1.47.

Boot Code for the A9782A, A9784A, and AB465 Cards

1. In nPars mode from the EFI device prompt, issue the ode fcfupdate command. For

example:

Shell>fs0: ode fcfupdate

***************************************************************************

* List of Supported IO Cards *

***************************************************************************

Index Card Name H/W Path FW Revision

----- ------------------ ----------------------------- ------

0 HP A9782A/LAN Card Acpi(000222F0,0)/Pci(1|0)/Pci(6|0) 7000a

***************************************************************************

* List of Firmware Files found *

***************************************************************************

File Name Ver. Size Vendor ID & Device ID Supported

--------------------- ------ ------ -----------------------------

brcm_efi.frm 7000b 79872 0x14e4 0x16c7

a9782a_bc.frm 230 11288 0x14e4 0x16c7

2. To display the boot code version, execute the dispbc command. For example:

FCFUPDATE> dispbc

Card Boot Code Rev

------------------ --------------

HP A9782A/LAN Card 225

4.3.5 Obtaining and Installing Card Firmware (Integrity)

For vPars A.04.xx and A.05.xx, you can download the required HBA EFI utilities, firmware, and

EFI drivers for the cards from the web:

1. 1. Go to the http://www.hp.com website.

2. Click the Software & Driver Downloads link.

3. Enter vPars in the search box and click the >> search button.

4. Select the vPars release.

• For vPars A.04.xx, select HP-UX 11i v2 Virtual Partitions.

• For vPars A.05.xx, select HP-UX 11i v3 Virtual Partition Software.

5. Under Select operating system click HP-UX 11.x (it is the only one listed).

6. In the EFI (extensible firmware interface) table, click the applicable firmware version.

• For vPars A.04.xx, select the “vPars HBA EFI/firmware for HP-UX 11i v2 on Integrity”

download.

• For vPars A.05.01, select the “vPars A.05.01” version of the “vPars HBA EFI/firmware

for HP-UX 11i v3 on Integrity” download.

• For vPars A.05.02 or later, select the “vPars A.05.xx” version of the “vPars HBA

EFI/firmware for HP-UX 11i v3 on Integrity” download.

7. Click the Release Notes tab to view instructions on how to install the firmware. The

instructions for installing firmware differ for each type of card.

54 Supported Configurations