Installing and Managing HP-UX Virtual Partitions (includes A.04.01)

Monitor and Shell Commands
Boot||Shut: Shutting Down or Rebooting the nPartition (OR Rebooting the vPars Monitor)
Chapter 5
133
This command controls power enable to a hardware device.
B - Cabinet
C - Cell
I - IO Chassis
Select Device: c
Enter cabinet number: 0
Enter slot number: 6
The power state is ON for the Cell in Cabinet 0, Slot 6.
In what state do you want the power? (ON/OFF) OFF
GSP:CM>
WARNING Before modifying power settings and for detailed warnings and information
on power for nPartitionable servers, please read the section "Powering Cells
and IO Chassis On and Off" in the manual HP System Partitions Guide
available at http://docs.hp.com.