Installing and Managing HP-UX Virtual Partitions (includes A.04.01)

Crash Processing and Recovery
Recovery: Ignite-UX Recovery
Chapter 7
205
Recovery: Ignite-UX Recovery
This section covers using Ignite-UX for recovery of vPars-enabled systems. For information on
• make_net_recovery, see “Using make_net_recovery” on page 206
• make_tape_recovery, see “Using make_tape_recovery” on page 208
• using tape devices, see the whitepaper Booting, Installing, Recovery, and Sharing in a vPars Environment
from DVD/CDROM/TAPE/Network
• using golden images, see the whitepaper Using Golden Images with Virtual Partitions
• using Ignite-UX, see the manual Ignite-UX Administration Guide
The whitepapers and manuals listed above are available at the HP Documentation web site:
http://docs.hp.com/hpux/11i/index.html#Virtual%20Partitions
NOTE Using vparboot -I with Ignite-UX on PA-RISC systems
When using Ignite-UX version C.06.XX or later, note that the bootable kernel path has changed
from /opt/ignite/boot/WINSTALL in Ignite-UX B.05.XX and earlier
to /opt/ignite/boot/Rel_B.11.NN/WINSTALL in Ignite-UX C.06.XX and later
Thus, when using Ignite-UX C.06.XX or later, you must specify the absolute path for the
bootable kernel for the vparboot -I command line.
For more information and an example, see “(PA-RISC only) The WINSTALL Boot Kernel Paths
with Different Versions of Ignite-UX and the vparboot -I command” on page 24.