User’s Guide HP iPAQ Bluetooth Stereo Headphones Document Part Number: 378962-001 November 2004
© 2004 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. Intel is a trademark of Intel Corporation in the U.S. and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
CAUTION: Do not wear HP iPAQ Bluetooth Stereo Headphones while operating a motor vehicle or in an area in which it is dangerous for your hearing to be impaired. Getting to Know Your HP iPAQ Bluetooth Stereo Headphones Button Function Forward Tap to track forward to the next media file in the playlist. Back Tap to track backward to the previous file in the playlist. Volume Up Press to increase the volume in the headphones. Volume down Press to decrease the volume in the headphones.
Installing the Headphones Driver 1. Perform a soft reset on your HP iPAQ Pocket PC by pressing the Reset button on the back or bottom of the device. For more information on performing a soft reset, refer to the User’s Guide that came with your HP iPAQ Pocket PC. 2. Backup your iPAQ Pocket PC using ActiveSync before installing the Headphones driver. 3. If the Bluetooth Radio on your Pocket PC is on, turn it off. 4. Establish a connection from your iPAQ Pocket PC to your desktop computer via ActiveSync.
3. On your Pocket PC, tap the iPAQ Wireless icon on the bottom right of the screen or, for older models, tap the Bluetooth icon 4. Turn on the Bluetooth Radio by tapping the Bluetooth icon. For older iPAQ Pocket PCs, turn on the Bluetooth Radio by tapping selecting “Turn Bluetooth ON” from the dropdown box in the bottom right corner of the screen.
5. Tap the Manager button in the Bluetooth section of the screen. For older iPAQ Pocket PC Models, tap the Bluetooth icon at the bottom right of the screen, and open the Bluetooth Manager. The following screen should appear: 6. On the headphones, press and hold the Multi Function button in the center of the right earpiece for ten to fifteen seconds until the light flashes red and blue. 7. The headphones are now in Pairing Mode. Release the button. The light will continue to flash red and blue. 8.
9. An icon will appear for the BT Headphones. Tap this icon. 10. When your device discovers the headphones for the first time, you will be prompted for a Passkey. The Passkey is 0000 11. Tap OK. 12. Tap Finish. 13. When pairing is sucessful, the LED on the headphones will flash blue. 14. If no pairing occurs in the next two minutes, the headphones will return to stand-by mode, and the LED will flash blue.
Reestablishing Connection to the Headphones Once your headphones have made an initial pairing with the iPAQ Pocket PC, you can reestablish the connection easily: 1. Verify that the iPAQ Pocket PC Bluetooth Radio is turned on. 2. Turn on the headphones by holding down the Multi Function button for about two seconds, until the blue light flashes. 3. On the iPAQ Pocket PC, play the audio file. 4. Press the Multi Function button on the right earpiece of the headphones.
To pause audio, press the Multi Function button To resume play, press the Multi Function button again. To track forward, press the Forward button, marked “>” To track backward, press the Back button marked “<“ To increase the volume, press the Volume Up button marked “+” To decrease the volume, press the Volume Down button marked “-” Charging the Headphones Note: Headphone batteries are not user replaceable. To charge the HP iPAQ Bluetooth Stereo Headphones: 1.
Before Calling Technical Support Perform a Soft Reset on the HP iPAQ Pocket PC by pressing the Reset button on the back or bottom of the HP iPAQ Pocket PC. For instructions, see the User’s Guide which came with your HP iPAQ Pocket PC. Perform a Soft Reset on the HP iPAQ Bluetooth Stereo Headphones by placing the tip of the stylus into the round hole next to the charging connector on the headphones.
Preparing to Call Technical Support If you cannot solve a problem using the tips in this guide or the HP Support Forum, you may need to call technical support. Contact your local HP authorized dealer, reseller, or service provider for the technical support number in your area.
Wireless Notices In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc. If you are uncertain of the policy that applies to the use of this device, please ask for authorization to use it prior to turning it on. Å WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio exposure limits.
CE Compliance of this product is valid only if powered ✎ Note: with the correct HP-provided and CE marked AC Adapter. If this product has telecommunication functionality, it also complies with the essential requirements of: ■ R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family.
Lisence required for use. Verify with your dealer or directly with General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze). France: L’utilisation de cet equipment (2.4 GHz Wireless LAN) est soumise a certaines restrictions: Cet Equipment peut etre utilise a L’interieur d’un batiment en utilisant toutes les frequences de 2400 a 2483.5 MHz (Chaine 1-13).
Japanese Regulatory Wireless Notice HP iPAQ Bluetooth Stereo Headphones User’s Guide 15
Battery Warning Å WARNING: This device contains a lithium ion rechargeable battery. To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water WARNING: To reduce the risk of personal injury, electrical shock, fire or damage to the equipment: ■ Plug the AC Adapter into an electrical outlet that is easily accessible at all times.
