Fabric OS Encryption Administrator's Guide

118 Fabric OS Encryption Administrator’s Guide

53-1002159-03

Configuring cluster links

Node is a group leader node

1. Log in to the group leader as Admin or SecurityAdmin.

2. Reboot the encryption switch/DCX (both active and standby central processors) so the existing

Group Leader fails over and one of the member nodes assumes the role of Group Leader.

a. If the EG is not a single node EG, reboot the encryption switch/DCX (both active and

standby central processors) so the existing Group Leader fails over and one of the member

nodes assumes the role of Group Leader.

b. If the node is a single node EG, complete the following steps:

1. Delete the encryption group.

2. Change the IP of the switch.

3. Create the encryption group.

3. After the encryption group is converged, complete the steps noted in “Node is a member

node”.

Node is a member node

1. Log in to the Group Leader as Admin or SecurityAdmin.

2. Eject and deregister the node from the encryption group.

3. Change the IP address of the member node using the new IP address.

4. Reboot the member node (the node on which the IP address has been modified).

5. Re-register the node with the Group Leader using new IP address.

NOTE

A reboot is not needed beginning with Fabric OS v6.4.0.