Fabric OS Encryption Administrator's Guide

134 Fabric OS Encryption Administrator’s Guide
53-1002159-03
Steps for connecting to an SKM or ESKM appliance
3
NOTE
If the maximum number of certificates is exceeded, the following message is displayed.
Maximum number of certificates exceeded. Delete an unused certificate with the
‘cryptocfg –delete –file’ command and then try again.
6. Enter the cryptocfg
--show -file -all command on the group leader to verify that you have
imported all necessary certificates.
The following example shows the member node CP certificate that was imported earlier to the
group leader.
SecurityAdmin:switch>cryptocfg --show -file -all
File name: enc_switch1_cp_cert.pem, size: 1338 bytes
7. On the group leader, register each node you are planning to include in the encryption group.
Enter the cryptocfg
--reg -membernode command with appropriate parameters to register the
member node. Specify the member node’s WWN, Certificate filename, and IP address when
executing this command. Successful execution of this command distributes all necessary node
authentication data to the other members of the group.
SecurityAdmin:switch>cryptocfg --reg -membernode \
10:00:00:05:1e:39:14:00 enc_switch1_cert.pem 10.32.244.60
Operation succeeded.
NOTE
The order in which member node registration is performed defines group leader succession. At
any given time there is only one active group leader in an encryption group. The group leader
succession list specifies the order in which group leadership is assumed if the current group
leader is not available.
8. Display encryption group member information. This example shows the encryption group
brocade with two member nodes, one group leader and one regular member. No key vault or
HA cluster is configured, and the values for master key IDs are zero.
SecurityAdmin:switch>cryptocfg --show -groupmember -all
NODE LIST
Total Number of defined nodes:2
Group Leader Node Name: 10:00:00:05:1e:41:9a:7e
Encryption Group state: CLUSTER_STATE_CONVERGED
Node Name: 10:00:00:05:1e:41:9a:7e (current node)
State: DEF_NODE_STATE_DISCOVERED
Role: GroupLeader
IP Address: 10.32.244.71
Certificate: GL_cpcert.pem
Current Master Key State: Not configured
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master Key State:Not configured
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
EE Slot: 0
SP state: Operational; Need Valid KEK
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
No HA cluster membership
Node Name: 10:00:00:05:1e:39:14:00
State: DEF_NODE_STATE_DISCOVERED