Fabric OS Encryption Administrator's Guide

Fabric OS Encryption Administrator’s Guide 233
53-1002159-03
Management application encryption wizard troubleshooting
6
General errors related to the Configure Switch Encryption wizard
Table 13 provides additional information for failures you might encounter while configuring
switches using the Configure Switch Encryption wizard.
Create a new master key (opaque key
vaults only)
A failure occurred while attempting to
create a new master key.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2Re-run the Configure Switch Encryption wizard for
the switch.
Manual Option:
1Launch the Encryption Group Properties dialog box,
and click Security.
2Click the Master Key Action button and select Create
New Master Key to generate a new master key.
Save the switch’s public key
certificate to a file.
The switch’s public key certificate could
not be saved to a file.
Note: Verify that the path name and the
file name that you are using are both
valid and that you have write
permissions for the file.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2Re-run the Configure Switch Encryption wizard for
the switch.
Manual Option:
1 Save the switch’s public key certificate to a file using
the Switch Encryption Properties dialog box.
2 Follow the Key Vault instructions
TABLE 12 Error recovery instructions for adding a switch to a new group (Continued)
Configuration task Error description Instructions
TABLE 13 General errors related to the Configure Switch Encryption wizard
Problem Resolution
Initialization fails on the encryption engine after the encryption
engine is zeroized.
Reboot the switch.
Configuration Commit fails with message “Default zone set to all
access at one of nodes in EG.”
Default zoning must be set to no access.