Fabric OS Encryption Administrator's Guide

Fabric OS Encryption Administrator’s Guide 249
53-1002159-03
Appendix
A
State and Status Information
In this appendix
•Encryption engine security processor (SP) states . . . . . . . . . . . . . . . . . . . . 249
•Security processor KEK status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
•Encrypted LUN states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Encryption engine security processor (SP) states
Table 18 lists the encryption engine security processor (SP) states.
TABLE 18 Encryption engine security processor (SP) states
Encryption engine security processor (SP) state Description
Not available SLOT_XXX_SCN has not been received (debug message).
Not Brocade Encryption Switch or DCX Debug message.
Not Ready BLADE_RDY_SCN has not been received (debug message).
Fail to connect to blade Encryption engine is not connected to the blade processor.
Starting BLADE_RDY_SCN received and initializing.
SPC Connecting to SP Establishing connection to CP.
SPC Connected to SP Connection to CP established.
SP Initialized SP initialization completed.
Waiting for initnode SP is awaiting initialization. Run initnode.
Disabled SP is disabled.
Encryption engine Faulty Encryption engine is faulty (BP fault or SP fault). Issue reboot.
Waiting for initEE SP is awaiting initialization. Run initEE.
Waiting for regEE SP has its own certificates but is awaiting FIPS certificates. Run
regEE.
Waiting for enableEE Awaiting the explicit enabling of encryption engine. Run enableEE.
Operational; Not Online Encryption engine is operational but offline.
Operational; Need Valid KEK No current master key or primary or secondary link key. Check the
KEK status for more details.
Operational; Need Encryption Group Encryption engine is operational, but EG is not configured or EG
information is not available. Check EG status.
Online Encryption engine is online.
Zeroized Encryption engine is zeroized
INVALID Encryption engine is invalid