Fabric OS Encryption Administrator's Guide

52 Fabric OS Encryption Administrator’s Guide
53-1002159-03
Adding a switch to an encryption group
2
FIGURE 37 Error Instructions dialog box
8. Review the post-configuration instructions, which you can copy to a clipboard or print for later.
9. Click Finish to exit the Configure Switch Encryption wizard.
10. Review “Understanding configuration status results” on page 46.
NOTES:
• If any configuration item is unsuccessful, instructions for providing the remedy can be found in
the Next Steps dialog box in the Configure Switch Encryption wizard.
• If connectivity to the SKM/ESKM results in authentication failure, complete the following steps:
• Export the switch’s public certificate file.
• Get the certificate signed by the SKM/ESKM local CA.
• Import the signed certificate onto the switch.
• From the switch, select Key Vault Credentials and provide the user name and password.
When completed, all operations should be successful and the switch should show that it is
connected to the SKM/ESKM. Refer to the Next Steps dialog box in the Configure Switch
Encryption wizard for brief instructions that are specific to certificate exchanges between the
switch and key manager you are using.