Fabric OS Encryption Administrator's Guide

Fabric OS Encryption Administrator’s Guide 61
53-1002159-03
Adding encryption targets
2
7. Select hosts using either of the following methods:
a. Select a maximum of 1024 hosts from the Hosts in Fabric table, then click the right arrow
to move the hosts to the Selected Hosts table. (The Port WWN column contains all target
information that displays when using the nsshow command.)
b. Manually enter world wide names in the Port WWN and Node WWN text boxes if the hosts
are not included in the table. You must fill in both the Port WWN and the Node WWN. Click
Add to move the host to the Selected Hosts table.
8. Click Next.
The Name Container dialog box displays. The dialog box enables you to specify a name for the
target container that is created in the encryption engine to hold the target configuration data.
The container name defaults to the target WWPN. You can, however, rename the container
name. Target container names can have up to 31 characters. Letters, digits, and underscores
are allowed.
FIGURE 47 Name Container dialog box
9. Click Next.
The Confirmation dialog box displays.