Fabric OS Encryption Administrator's Guide

Fabric OS Encryption Administrator’s Guide 67
53-1002159-03
Adding target disk LUNs for encryption
2
FIGURE 55 Correcting an Encryption Mode mismatch
9. Select the LUN from LUN list.
10. Set the LUN state to Encrypted or Clear Text as required.
If the LUN already has an existing key ID, the State field is automatically set to Encrypted. You
can accept this state or change it as desired.
If the LUN does not have an existing key ID, you must select the LUN state.
When you correct a policy on a LUN, it is automatically selected for all paths to the selected
LUN. When you modify LUN policies, a Modify icon appears to identify the modified LUN entry.
11. Click Add or Apply to apply the modifications.
12. Click OK to commit the transaction.
NOTE
If the LUN state is not showing correctly (for example, Not Ready), enter the cryptocfg --discoverLUN
command from the CLI and it should help resolve the issue. When the command finishes, refresh
the screen to check the new status of LUNs.