Fabric OS Encryption Administrator's Guide

74 Fabric OS Encryption Administrator’s Guide
53-1002159-03
Tape LUN statistics
2
FIGURE 62 Tape LUN Statistics dialog box
5. To clear the tape LUN statistics for all member LUNs for the container, click Clear.
6. When prompted with a confirmation dialog box, click Yes.
7. To update the tape LUN statistics, click Refresh.
Viewing and clearing tape LUN statistics for a container
To view or clear statistics for tape LUNs in a container, follow these steps:
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays.
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar, or right-click a group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays. The dialog box lists configured crypto target
containers.
FIGURE 63 Encryption Targets dialog box