HP LaserJet 4050, 4050N, 4050T and 4050TN Printers - User's Guide

B-22 Control Panel Menus
EN
CFG TCP/IP=NO NO
YES
NO:
The TCP/IP Menu is not accessible.
YES
: The TCP/IP Menu appears. In the TCP/IP
Menu, you can specify
BOOTP=YES
for TCP/IP
parameters to be automatically loaded from a
bootp or DHCP server when the printer is
turned on. If you specify
BOOTP=NO
, you can
manually set selected TCP/IP parameters from
the control panel. You can manually set each
byte of the IP address (IP), Subnet Mask (SM),
Syslog Server (LG), and Default Gateway
(GW).
If the Syslog Server IP address is left blank, the
printer will still work. Also, you can manually set
the Timeout time period.
CFG ETALK=NO NO
YES
NO
: The EtherTalk Menu is not accessible.
YES
: The EtherTalk Menu appears. In the
EtherTalk Menu you can set the AppleTalk
phase parameter (
ETALK PHASE=1 or 2
) for
your network.
EIO Menu (Continued)
Item Values Explanation