HP LaserJet 4050, 4050N, 4050T and 4050TN Printers - User's Guide

Printer Memory and Expansion C-5

Checking Memory Installation

Follow this procedure to verify that DIMMs are installed correctly:

Check that the printer’s control panel displays

READY

when the

printer is turned on. If an error message appears, a DIMM might

have been incorrectly installed. Check the printer messages

(page 103).

Print a new configuration page (page 134).

Check the memory section on the configuration page and

compare it to the configuration page printed before the DIMM

installation. If the amount of memory has not increased, the DIMM

might not be installed correctly (repeat the installation procedure)

or the DIMM might be defective (try a new DIMM).

Note

If you installed a printer language (personality), check the Installed

Personalities and Options section on the configuration page. This

area should list the new printer language.