HP LaserJet 4050, 4050N, 4050T and 4050TN Printers - User's Guide

EN
Chapter 2: Printing Tasks 55
Printing Transparencies
Use only transparencies recommended for use in laser printers. For
transparency specifications, see page A-10.
•
Load transparencies face up in Tray 1 with the top toward the
printer.
•
A stack of 50 to 100 transparencies can be printed from other
trays. Because transparencies are heavier than paper, do not
load the other trays to capacity. For orientation in other trays,
see Figure 12 on page 46.
•
To prevent transparencies from becoming too hot or sticking
together, use the top output bin. Before using the top output bin,
be sure the rear output bin is closed (page 32). Remove each
transparency from the output bin before printing another.
•
Place transparencies on a flat surface to cool after removing
them from the printer.
Figure 15 Printing Transparencies