HP LaserJet 42X0/43X0 Series - (Multiple Language) Envelope Feeder Install Guide

Insert the envelope feeder firmly into the
printer until it latches into position. Pull
outward on the envelope feeder to make
sure that it is securely in place.
Load envelopes with the seams down and
the postage-end toward the printer. Gently
push the envelopes in as far as they will go.
Fold down the envelope-feeder tray (callout
1). Lift the envelope weight (callout 2).
Adjust the guides to touch the envelopes
without bending them.
Note Make sure that the envelopes are not
stacked higher than the arrows on the guides.
Squeeze the release lever on the left
envelope guide and slide the guides apart.
Lower the envelope weight onto the
envelopes.
4
English
English
HP LaserJet information engineering