HP LaserJet Multifunction (MFP) and LaserJet Single Function Products - Changes to the Usage Pages for "Print Usage Tracker"

Page 6
How is the new page counting method enabled and what is
needed?
1) Verify your product supports the new feature and that your product has the necessary version of
firmware to enable it.
NOTE: A quick glance at the product matrix
below will indicate if the new functionality is
supported in your product and the version of firmware that is required to obtain the feature.
Functionality support will only be available for those products listed in the matrix. If your product
is not listed, no support will be provided.
2)
Access the products Embedded Web Server (EWS) acceptance and activation screen
by selecting the “Settings Tab >> Security >> Device Security Settings” (See Figure 3 for an
example of the screen)
3) If the acceptance and activation screen is not available, you will have to update your products
firmware to access the screens. (If it is available, jump to step 4)
If it is not, go to the Supported
Product Matrix section of the document below to learn what version of firmware is needed and
how to obtain the latest firmware. After updating the firmware return to step 5.
4) Review the acceptance screen so you understand the Terms and Conditions and feel comfortable
with them.
5) If you are comfortable with the acceptance statements and how the new counting functionality
may or may not affect your HP device or product use model then choose to enable the feature.
As stated previously it is very important
to understand that once enabled the device
cannot return to the previous counting method.
a. Select “I Accept”
b. Select “Enable the Print Usage Tracker feature on this device”
c. Press “Apply”
IMPORTANT NOTE: This feature may also be enabled through HP’s Device management software
called HP Web JetAdmin. If interested in enabling this functionality using Web JetAdmin it is
recommended that you access the HP Web Jet Admin support pages for information on updating WJA
to version 10.2 Service Release 2 (version 10.2.63313) or greater. You can access the Web Jet
Admin support pages by using the following URL: www.hp.com/go/webjetadmin