HP LaserJet 9040/9050 - User Guide

38 Chapter 2 Printing tasks ENWW
5 Use or to scroll to TRAY 1 TYPE and then press .
6 Use or to scroll to the correct type and then press . The message SETTING SAVED
appears on the control-panel display.
7 Press M
ENU to exit the menus.
8 Open optional Tray 1.
9 Load (orient) paper according to size and finishing options.
CAUTION To avoid jams, print sheets of labels one at a time.
10 Adjust the paper guides so that they lightly touch the paper stack, but do not bend the paper.
11 Make sure that the paper fits under the tabs on the guides and does not extend above the
load level indicators.
Note If printing on A3, 11 x 17, or other long media, also pull out the tray extension until it stops.
12 Look at the control panel within a few seconds of loading the paper. The tray configuration
appears. (Open and close the tray again if the time has already elapsed.)