HP Commercial LaserJet Printers and MFPs - Imaging and Printing Security Best Practices

Chapter 3 HP LaserJet and Color LaserJet MFP Security Checklist 19
4. Scroll down to the SNMPv1 Settings section, and select SNMPv1 disabled
(Figure 11).
Figure 11: The SNMP Version 3 Only setting.
This setting limits all SNMP configuration communication to only SNMPv 3. Once applied your
MFPs will not allow SNMPv1 SET and SNMPv2 GET.
5. Choose Apply at the bottom of the SNMP Version Access Control configuration to
apply the settings to the selected devices. This will open the configure devices
dialogue box (Figure 12).