HP Commercial LaserJet Printers and MFPs - Imaging and Printing Security Best Practices

Chapter 3 HP LaserJet and Color LaserJet MFP Security Checklist 26
Figure 19: The Enable Features option.
2. Next, select the print features you would like to enable or disable. The following
table lists and explains the recommended settings for the Enable Features
option:
Feature Recommended
Setting
Explanation
EWS Config Disabled***
***NOTE:
The recommendation is to
disable EWS Config, but you
should leave it enabled until
you are finished configuring
this checklist. Otherwise, it will
prevent you from configuring
some of the remaining settings.
Disabling EWS Config closes
down the EWS and it
eliminates the configuration
settings that are controlled by
the EWS. It also removes the
affected settings from Web
Jetadmin menus. This includes
settings for email, send to
folder, and fax. You should
disable EWS Config while the
MFPs are in use, and enable it
only to make changes to the
affected configurations.
Telnet Config Disabled
Disabling Telnet Config
prevents access to
configuration settings and
other features through Telnet.