HP Commercial LaserJet Printers and MFPs - Imaging and Printing Security Best Practices

Chapter 3 HP LaserJet and Color LaserJet MFP Security Checklist 28
WARNING: You will want to enable WS-Discovery on this printer if the
following apply: You are using an IPv6 only network, you use WS-Print
to discover your devices, or operate in a Windows Vista/ Windows 7
centric environment. If you are unsure of this setting, we highly
recommend testing its implications with a single device before applying
it to your whole fleet.
Note:
If you are using third party solutions recommendations may be different.
Please see the Advanced Security chapter. As a rule, you should close
down any MFP network features that are not in use.
3. Click Apply in the lower right hand corner to view the Configure Devices
dialogue box. (Figure 20). Review your selections carefully before clicking on the
Configure Devices button.