HP Commercial LaserJet Printers and MFPs - Imaging and Printing Security Best Practices

Chapter 3 HP LaserJet and Color LaserJet MFP Security Checklist 48
Configuring MFP Embedded Web Server Settings
Embedded Web Server Configuration Options
Each MFP has an Embedded Web Server that provides network access to view MFP status, to set
preferences, and to configure the MFP. You can view an MFP Embedded Web Server by typing the
MFP IP address into a web browser. This section covers settings that Web Jetadmin access through
the EWS.
Note:
Later, at the end of this checklist, you will disable EWS Config, which
disables all of the functions of EWS including those managed in Web
Jetadmin. Now, however, you should configure the settings below for
security while EWS Config is enabled.
Follow these instructions:
1. Click the Embedded Web Server category to select Embedded Web
Server Configuration Options (Figure 45).
Figure 45: The Embedded Web Server Configuration Options.
2. Click to enable Continue Button and Outgoing Mail, and leave the
remaining options blank. See below for more information:
The Embedded Web Server Configuration Options are either enabled or disabled in
this menu. They will be reconfigured regardless of their current state (which is not displayed). If
you select an option, you are enabling it; if you leave an option blank, you are disabling it.
The following table lists the recommended setting for each item in this list: