P1600 Series Printers - Software Technical Reference

Light status State of the product Action

Status lights cycle The status lights cycle during the

formatter initialization period or when the

product is processing a cleaning page.

No action is required. Wait for the

initialization period to end. The product

enters the ready state when the

initialization period is finished.

Ready light is on, and attention light is

off.

The product is in the ready state. No action is required. The product is

ready to receive a print job.

Ready light is blinking, and attention

light is off.

The product is receiving or processing

data.

No action is required. The product is

receiving or processing a print job.

Attention light is blinking, and ready

light is off.

The product has experienced an error that

can be corrected at the product, such as

a jam, an open door, the absence of a

print cartridge, or the absence of paper in

the proper tray.

Inspect the product, determine the error,

and then correct the error. If the error is

the absence of paper in the proper tray or

the product is in a manual feed mode, put

the proper paper in the tray and follow the

on-screen instructions, or open and close

the print-cartridge door to resume

printing.

Table 1-13 Control-panel light patterns (continued)

28 Chapter 1 Purpose and scope ENWW