P1600 Series Printers - Software Technical Reference

Light status State of the product Action

Attention light is blinking, and ready

light is on.

The product has experienced a continual

error from which it can recover on its own.

If the recovery is successful, the product

continues to the processing data state

and completes the job.

If the recovery is unsuccessful, the

product continues to the continuable

error state. Try removing any paper from

the paper path and turning the product

power off, and then on again.

The attention and ready lights are on. The product has experienced a fatal error

from which it cannot recover.

1. Turn off the product or disconnect

the power cord from the product.

2. Wait 30 seconds, and then turn on

the product or reconnect the power

cord to the product.

3. Wait for the product to initialize.

4. If the error persists, contact

customer support for more

information.

The wireless light is blinking. The product is attempting to locate a

wireless network.

No action is required.

Table 1-13 Control-panel light patterns (continued)

ENWW Documentation 29