10.5 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96242, March 2013)

HP StoreVirtual CLI| Commands| 101
breakShadowCopies Optional Break the shadow copy set
maskLun Optional Mask the shadow copy LUN from the host. It works in conjunction with
breakShadowCopies and is valid only when breakShadowCopies is
specified (Windows 2008 only).
snapshotName Optional The name of the remote snapshot
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
description Optional Optional description
Example
cliq vssSnapshot
waitForEvent
This command waits for an alert or event message.
Availability: Windows, SSH
Version: 9.0
Request Syntax
cliq waitForEvent login= userName= passWord=
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
groupName Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
receivePort Optional The TCP port to receive the discovery packets (defaults to an unused
port if unspecified)
timetowait Optional The maximum amount of time to wait before timing out.
Example
cliq waitForEvent login=10.0.1.2 userName=admin passWord=secret
cliq waitForEvent
waitForUpdate
This command will block on a change to the state in the management group.
Availability: Windows, SSH
Version: 8.0
Request Syntax
cliq waitForUpdate login= userName= passWord=