11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Parameters

DescriptionName

The IP addresses or DNS-resolvable names of one or more storage systems.{login}

The authentication user name for the storage system. If you use this parameter,

you must include the passWord parameter with it. Or, you can use the

groupName parameter instead of userName and passWord.

{userName}

The name of the management group. Use this parameter if you do not use

the userName and passWord parameters. Because groupName has cached

credentials, it does not require the userName and passWord parameters.

{groupName}

The password for the storage system. Required when the userName

parameter is used.

{passWord}

The name of the volume in the management group.{volumeName}

The name of the remote snapshot.{snapshotName}

Enable or disable adaptive optimization. Values are 0—Disable and

1—Enable. 1 is the default.

[adaptiveOptimization]

Example 150 Windows

cliq makeRemote login=10.1.2.3 userName=admin passWord=secret

volumeName="TheVolume" snapshotName="TheSnapshot"

Example 151 SSH

makeRemote volumeName="TheVolume" snapshotName="TheSnapshot"

modifyAdminGroup

Description

Modify one or more properties of the SAN administrative group.

CAUTION: If the adminUserName parameter is used, all user IDs that are currently in the group

that are not included with this parameter will be removed.

Syntax

modifyAdminGroup {login=} { userName= passWord= | groupName= }

{adminGroupName=} [adminUserName=] [description=] [permissions=] [adGroup=]