8.5 HP StorageWorks P4000 VSA Installation and Configuration Guide (TA688-96017, September 2010)

Getting started with the CMC
• Open the CMC.
If you are opening the CMC for the first time, and have not already discovered storage systems
on the SAN, the Find Wizard opens automatically.
Figure 2 Opening the CMC for the first time
.
• Click Next and proceed through the Find Nodes Wizard.
The wizard guides you through the steps for finding the VSA on your network. After finishing the
wizard, the VSA appears in the navigation window in the Available pool.
Figure 3 Newly found VSA in CMC
.
Configuring the hardware
Configure hardware settings before you add the VSA to a management group. Select the VSA in the
navigation window to expand the hardware configuration categories. Use these categories to configure
RAID (if necessary), monitoring, and the network.
Getting started with the P4000 SAN22