HP LeftHand SAN Solutions Support Document - Application Notes - QLogic HBAs and the LeftHand SAN 20071223

grown defects list commonly implemented for ATA or SCSI direct attached

disks. The Verify Disk is useful to ensure that the QLogic HBA can access the

raw LeftHand SAN/iQ iSCSI volume.

Note the Ping Utility Diagnostic Tool. Provided that the network is

appropriately configured, a link light is achieved on the back of the QLogic

iSCSI HBA, an IP address is assigned to the QLogic iSCSI HBA, and an IP

address is assigned to the LeftHand SAN/iQ Virtual IP for the cluster, the

PING utility will return successful.

After upgrading the firmware is important to Reinit Firmware, configure the

QLogic iSCSI HBA (if needed for boot), and save the settings.