HP LeftHand SAN Solutions Support Document - Installation Manual - VSA Quick Start Guide for SAN/iQ® 8.0

16
2 Click Next and proceed through the Find Nodes Wizard.
The wizard guides you through the steps for finding a VSA on your
network. After finishing the wizard, your virtual storage node appears in
the navigation window in the Available pool, as shown in Figure 7
Figure 7Newly found VSA in CMC
Configuring the Hardware with the SAN/iQ Software
1 Select the VSA in the navigation window and expand the tree underneath.
Verifying RAID
Your virtual storage appliance has virtual RAID as the RAID type. You only
need to turn it on.
1 In the tree under the VSA select Storage.
The Tab view opens with the RAID Setup tab displayed.
2 Click the RAID Setup tasks list and choose Configure RAID.
The Configure RAID window opens, as shown in Figure 8