HP Integrity BL860c Server Blade Linux Installation white paper

Proceed to the 'Installing the RPM Package' step. When installing the
RPM package something like the following will probably work:
rpm -ivh /media/tg3-3.71b-1.src.rpm
SUSE LINUX Enterprise Server 10 Installation via PXE
====================================================
Install the tg3-<version>.src.rpm onto your PXE server to enable
you to easily copy it over to your new system using the EFI
tftp command.
The standard SLES10 instalation media can be used to install from a
PXE server by using the following kernel command line option when
starting up the SLES10 install image:
ethtool=eth[0-3]="speed 1000 duplex full autoneg off"
Go thru the SLES10 install over the network and select the packages
that you need plus the package(s) to be able to build the tg3 driver.
Select the following packages to be able to build the tg3 driver
be installed:
+ C/C++ Compiler and Tools (from Filter->Patterns)
+ kernel-source-* package
+ kernel-syms-* package
After the install completes and is rebooting, enter the EFI shell.
Change to the volume corresponding to the EFI boot partition.
Use the tftp command to get the
Shell> fs0:
fs0:\> ls
Directory of: fs0:\
02/01/07 02:15p <DIR> 4,096 efi
0 File(s) 0 bytes
1 Dir(s)
fs0:\> tftp
tftp> get tg3-3.71b-1.src.rpm
Received 118081 bytes
tftp> quit
fs0:\> exit
Proceed to the 'Installing the RPM Package' step. When installing the
RPM package something like the following will probably work:
rpm -ivh /boot/efi/tg3-<version>.src.rpm
SUSE LINUX Enterprise Server 10 Installation via Virtual Media
==============================================================
On a Linux system that will be the client of the iLO, get the SLES10
.iso install image and the tg3-<version>.src.rpm file. This client
will provide the .iso images that can be used by the iLO and the
associated system to install Linux.
Do the following to convert the tg3-<version>.src.rpm file to a .iso
file that can be mounted the vmedia capability in iLO:
Appendix A: Instructions for Installing a New tg3 Driver for Ethernet Pass-Thru Interconnect Module Users 25