HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)
Figure 76 LU
SE configuration
Volume Manager guidelines
Thefollowingarethespecifications and restrictions on LDEVs used to configure a LUSE volume:
• Open volumes (OPEN-3, OPEN-8, OPEN-9, OPEN-E, OPEN-L, and OPEN-V) are supported.
• ThenumberofLDEVscombinedintoaLUSEvolumemustbewithintherangeof2to36.
NOTE:
The number of expanded LUs (LDEVs) should not exceed 36, even if the LUSE volume contains
another LUSE volume.
• The emulation type of LDEVs combined into a LUSE volume must be the same.
• The RAID level of LDEVs that are to be combined into LUSE volumes should be the same.
(Recommended).
NOTE:
Combining RAID-1 and RAID-5 volumes into the same LUSE volume is supported, but not
recommended.
• LDEVs or LUSE volumes to be combined must not have assigned path definitions. For this reason,
TrueCopy for z/OS®, Continuous Access XP, ShadowImage for z/OS, Business Copy XP, and
Continuous Access XP Journal pair volumes cannot be targets of Volume Manager operations
(see Volume Manager operations using a path-defined LDEV).
• LDEVs
to be combined into LUSE volumes must not be reserved for Auto LUN XP.
• When combining a LUSE volume with another LUSE volume, the range of LDEVs should not
overlap.
NOTE:
If you combine LDEV00, LDEV03, and LDEV05 into LUSE 1, combine LDEV02 and LDEV04 into
LUSE 2
,and combine LDEV06 and LDEV07 into LUSE 3, you can also combine LUSE 1 and LUSE 3.
However, you cannot combine LUSE 1 and LUSE 2, because the LDEV range in LUSE 1 and LUSE 2
overlap.
14 0
Overview of Volume Manager and Custom Volume Size