SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

ManualsBrandsHP ManualsSoftwareHP LUN Configuration and Security Manager XP Enterprise Media Kit

141

142

143

144

145

146

147

148

149

150

NOTE:

• Round up the value enclosed by two up arrows (↑) to the nearest whole number.

•Theuser-speciﬁed CV capacity is expressed in blocks.

• The boundary value is expressed in kilobytes. The boundary value depends on volume emulation

types and RAID levels (see Table 28).

If the emulation type is other than OPEN-V

• If the CV capacity unit is MB (megabytes):

To calculate the CV's user area capacity, use the following formula. The resulting user area capacity

is expressed in kilobytes.

↑↑ user-speciﬁed-CV-capacity ×1024÷capacity-of-a-slot ↑ ÷15↑ × capacity-of-a-slot ×15

NOTE:

• Round up the value enclosed by two up arrows (↑) to the nearest whole number.

•Theuser-speciﬁed CV capacity is expressed in megabytes.

• The slot capacity is expressed in kilobytes. The slot capacity depends on volume emulation

types (see Table 29).

To calculate the CV's entire capacity, use the following formula. The resulting entire capacity is

expressed in megabytes.

↑ (user-area-capacity + management-area-capacity)÷boundary-value ↑ × boundary-value ÷1024

NOTE:

• Round up the value enclosed by two up arrows (↑) to the nearest whole number.

• The user area capacity is expressed in kilobytes.

• The management area capacity is expressed in kilobytes. The management area capacity

depends on volume emulation types (see Table 27).

• The boundary value is expressed in kilobytes. The boundary value depends on volume emulation

types and RAID levels (see Table 28).

• If the CV capacity unit is blocks:

To calculate the CV's user area capacity, use the following formula. The resulting user area capacity

is expressed in kilobytes.

user-speciﬁed-CV-capacity ÷2

NOTE:

The user-speciﬁed CV capacity is expressed in blocks.

To calculate the CV's entire capacity, use the following formula. The resulting entire capacity is

expressed in blocks. To convert the resulting entire capacity into megabytes, divide this capacity

by 2,04

↑ (user-speciﬁed-CV-capacity + management-area-capacity ×2)÷(boundary-value ×2)↑ ×

(boundary-value ×2)

150

Overview of Volume Manager and Custom Volume Size