HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

guide for XP Disk Arrays or the HP StorageWorks XP Remote Web Console user guide for
XP12000/XP10000/SVS200.
2. From the option buttons on the left of the Command View XP or XP Remote Web Console main pane
for activating the array's features, click the Volume Manager button (
). The Volume
Manager main p
ane appears and enables you to operate Volume Manager or CVS.
3. The Volume Manager pane is the initial pane that appears. To operate CVS, click the Customized
Volume tab.
NOTE:
• To exit Volume Manager, click the
button (Exit) on the upper right of the Command View XP or
XPRemoteWebConsolemainpaneorendtheWebbrowser.
• TheinitialCommandViewXPorXPRemoteWebConsolemainpaneappearsinViewmode.To
implement any changes for Volume Manager or CVS, you must change the operation mode to
Modify mode. For more information, see Changing to Modify mode.
Changing to Modify mode
To implement any changes for Volume Manager or CVS, you must be in Modify mode. The array
information icons (Figure 81 and Figure 83) are on the upper right of the pane. These icons are
described in detail in the HP StorageWorks Command View XP user guide for XP Disk Arrays or the
HP StorageWorks XP Remote Web Console user guide for XP12000/XP10000/SVS200. To change from
View mode to Modify mode and back, two icons are important.
• Exclusive lock icons indicate the operation mode of all currently logged-in users. If all users are
operating in View mode, the Unlocked icon (
) appears. If a user is operating in Modify mode,
or if array maintenance or SNMP operations are being performed, the Locked icon (
) appears.
• Mode Changing icons allow users to change the operation mode between View mode () and
Modify mode (
).
NOTE:
OnlyoneuseratatimecanbeinModifymode.
1. You must have write permission for Volume Manager. For more information about assigning write
permission to a user ID, see the HP StorageWorks Command View XP user guide for XP Disk Arrays
or the HP StorageWorks XP Remote Web Console user guide for XP12000/XP10000/SVS200.
2. Veri
fy that the array is unlocked. If all users are operating in View mode, the Unlocked (
)andView
Mode
(
) icons appear (Figure 81). If a user is operating in Modify mode or if array maintenance
is being performed, the Locked icon (
) appears and you cannot change to Modify mode.
3. SelecttheModeChangingicon(
),whichshouldbeinViewmode. Aconfirmation message
appears (Figure 82). Click OK.
The Mode Changing icon changes from View mode to Modify mode (
), and the Unlocked icon
(
) changes to the Locked icon ( )(Figure 82).
Ch
ange back to View mode once you have applied the necessary changes. To go back to the View
mode, select the Mode Changing icon (
). If a confirmation message appears (Figure 82)clickOK.
Yo
u are back to View mode.
156
PreparingtouseVolumeManagerorCustomVolumeSize