SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

ManualsBrandsHP ManualsSoftwareHP LUN Configuration and Security Manager XP Enterprise Media Kit

151

152

153

154

155

156

157

158

159

160

Table 32 LDEV status icons

Icon LDEV status

Normal LDEV

Variable-sized volume (CV)

Expanded (LUSE) volume

LDEV Information table

This table is in the upper-right of the Volume Manager pane, and displays data for the LDEV you select

in the LDEV Information tree.

The LDEV Information table displays detailed information for all open-system LDEVs in the selected CU. If

you select a normal LDEV, the information in this table is for the top LDEV. If you select a LUSE volume, the

information in this table is for all LDEVs in the LUSE volume. The table displays the following information:

• LDEV:LDEVstatusicon(Table 32) and the CU and LDEV numbers. If the selected LDEV is a LUSE

volume, the LDEV number of the top LDEV in the LUSE volume appears.

NOTE:

If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more

information about external LUs, see the

HP StorageWorks External Storage XP user guide

NOTE:

If an LDEV number ends with V (for example, 00:01V), the LDEV is a virtual volume (V-VOL). For

more information about V-VOLs, see the

HP StorageWorks Snapshot XP user guide

• Emulation:

Emulation type. If the selected LDEV is a LUSE volume, the emulation type appears

with an asterisk and the number of volumes in the LUSE volume (for example, OPEN-E*5). If the

selected LDEV is a CVS volume, the emulation type appears with CVS (for example, OPEN-3 CVS).

• Capacity:L

DEV capacity in either MB or GB, depending on the unit selected in the Capacity

Unit box.

• RAID:LDEV'sRAIDlevel.

NOTE:

The RAID level is left unspeciﬁed with a hyphen (-)whentheLDEVisanexternalLUorvirtual

volume (V-

VOL).

• PG: Combination of the disk group and parity group. If the LDEV extends over two or more parity

groups, the smaller parity group number appears.

NOTE:

If a parity group number starts with E (for example, E1-1), the parity group consists of one or more

external LUs.

NOTE:

If a parity group number starts with V (for example, V1-1), the parity group consists of one or

more virtual volumes (V-VOLs).

160

Volume Manager operations