HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

• Emulation: LDEV's emulation type.
• Capacity: LDEV's capacity.
• OK: Creates the LUSE volume and sets the LUSE volume configuration to have LDEVs in the
LUSE components list. LDEVs registered as components of the LUSE volume appear in blue bold
italics in the LDEV Information table.
• Cancel: Cancels the operation to create a LUSE volume using LDEVs in the list.
Release LUSE Confirmation pane
When you select Release LUSE Volume,theReleaseLUSEConfirmation pane appears. You can verify that
the LUSE volumes listed in the confirmationpanearetheonesyouwantreleased.
NOTE:
If the select
ed LUSE volume has a path or if you selected anything other than a LUSE volume, this pane
lists only LDEVs containing a LUSE volume to be released.
Figure 87 Release LUSE Confirmation pane
• LDEVs containing a LUSE volume to be released
Displays LDEVs containing LUSE volumes to be released.
• LDEV: LDEV icon, CU number, and LDEV number.
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide .
NOTE:
If an LDEV number ends with V (for example, 00:01V),theLDEVisavirtualvolume(V-VOL).For
more information about V-VOLs, see the
HP StorageWorks Snapshot XP user guide .
• Emulation: LDEV's emulation type.
• Capacity: LDEV's capacity.
• OK: Releases the LUSE volume configuration in the release list. Released LDEVs appear in blue
bold italics in the LDEV Information table.
16 4
Volume Manager operations