SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

ManualsBrandsHP ManualsSoftwareHP LUN Configuration and Security Manager XP Enterprise Media Kit

161

162

163

164

165

166

167

168

169

170

NOTE:

If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more

information about external LUs, see the

HP StorageWorks External Storage XP user guide

NOTE:

If an LDEV number ends with V (for example, 00:01V),theLDEVisavirtualvolume(V-VOL).For

more information about V-VOLs, see the

HP StorageWorks Snapshot XP user guide

Viewing concatenated parity groups

1. From the Volume Manager pane, select a CU number in the LDEV Information tree. The LDEV

Information table displays all LDEVs in the selected CU.

2. In the LDEV Information table, right-click the free LDEVs you want to form the LUSE volume. If parity

groups are concatenated, a shortcut menu appears.

NOTE:

Concatenation List does

not

appear if the selected LDEV does

not

extend over concatenated

parity groups.

3. Select Concatenation List. The Concatenation List pane (Figure 89) appears.

4. When you are ﬁnished viewing the list, click OK (or Cancel).

Creating LUSE volumes

CAUTION:

LUSE creation is a destructive operation. Move and/or back up your data before proceeding.

TherearethreewaystocreateaLUSEvolume:

• Creating LUSE volumes using the Volume Count list (recommended)

• Creating LUSE volumes using the Select an LDEV list

• Creating LUSE volumes using the LDEV information table

Creating LUSE volumes using the Volume Count list

1. From the V

olume Manager pane, select a CU number to create a LUSE volume from the LDEV

Informa

tion tree.

2. In the Select an LDEV list, select a top LDEV of the LUSE volume.

The selected top volume appears in the Expanded LDEVs list. Normal LDEVs, CVS volumes, and

LUSE vol

umes that can be used for a LUSE volume appear in the Free LDEVs table.

3. In the Volume Count list, select the number of LDEVs needed to form a LUSE volume.

The Expanded LDEVs list displays as many LDEVs as speciﬁed in the Volume Count list. For example,

if you se

lect 3 in the Volume Count list, three LDEVS appear in the Expanded LDEVs list.

NOTE:

You cann

ot select LUSE volumes in the Volume Count list. To select LUSE volumes, select

LDEVs from the Free LDEVs table, and click Add.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

167