SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 91 Volume to Space Conﬁrmation pane

• VDEV information table: Displays information about volumes that will be converted to space areas.

• VDEV: Set of a disk group, parity group, and VDEV number.

NOTE:

If a VDEV number starts with E (for example, E1-1-(1)), the parity group consists of one or more

external LUs.

• CU:LDEV:CUandLDEVnumbers.

NOTE:

If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more

information about external LUs, see the

HP StorageWorks External Storage XP user guide

• Emulation: LDEV's emulation type.

• Capacity: Volume capacity in the unit selected from the Capacity Unit list in the Customized

Volume pa

ne (Figure 90).

• OK: Registers information about volumes in the setting list as data for the Volume to Space

operation.

• Cancel:C

ancels the Volume to Space operation.

Install CV pane (1)

Usethispanetodeﬁne and install one or more CVS volumes under an existing volume. You can specify

the emulation type and capacity of the CVS volume you want to create.

NOTE:

Different panes are used for OPEN-V and other emulation types (see Install CV pane (1) for OPEN-V

and Install CV pane (1) for other than OPEN-V).

InstallCVpane(1)forOPEN-V

Figure 92 shows the ﬁrst Install CV pane that appears when the selected emulation type is OPEN-V.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

17 7