SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

• Block: Blocks. This unit is used for specifying the capacity of external LUs. For more

information about external LUs, see the HP StorageWorks External Storage XP user guide.

• Specify capacity and number: Capacity and number of CVs in the CVS volume you want to create.

• Capacity: CVS volume's capacity in the unit selected in the Capacity Unit list. The available

capacity range (minimum - maximum) is shown on the right (for example, 46 - 6720 MB,

50 - 7168 Cyl,or315 - 8513 b lo cks ). The value can be incremented by 1 MB, cylinder, or block.

• Number: Number of volumes of that size. The available range is shown on the right (for

example, 1- 489).

• Divide free space by number: Used to create CVS volumes by specifying the number of CVs

in the CVS volume to be created.

• Number: Number of CVs in the CVS volume. If you select this option, the available range

is shown on the right (for example, 1-47).

• Divide free space by capacity: Used to create CVS volumes by specifying the capacity of CVs

in the CVS volume to be created.

• Capacity: Capacity of the CVS volumes to be created. The available capacity range

(minimum - maximum) is shown below Capacity (for example, 46 - 6720 MB, 50 - 7168 Cyl, or

315 - 8513 blocks).

• Set remaining space as volume: Used to create a CVS volume using the remaining space in

the VDEV.

• Set: Displays the selected settings in the LDEV information table on the left.

• Delete: Deletes the settings for CVS volumes selected in the LDEV information table.

• Clear: Deletes all the settings in the LDEV information table.

• Next: Displays the Install CV pane (2).

• Cancel: Cancels the selected settings, and returns to the Customized Volume pane.

Install CV pane (1) for other than OPEN-V

Figure 93 shows the Install CV pane (1) for emulation types other than OPEN-V.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

179