SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 93 Install CV pane (1) for other than OPEN-V

Thispanehasthefollowingfeatures:

• Parity Group: Selected free space's VDEV number.

NOTE:

If a parity group number starts with E (for example, E1-1), the parity group consists of one or more

external LUs.

NOTE:

If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group that

consists of one or more virtual volumes (V-VOLs).

• Emulati

on Type: Emulation type.

• Capacity Unit:Unit(MB, Cyl,orblock) in which the volume capacity is displayed.

• Capacity: CVS volume's capacity in the unit selected in the Capacity Unit list. The available

capacit

y range (minimum - maximum) is shown on the right (for example, 46 - 6720 MB,

50 - 7168 Cyl,or315 - 8513 bl oc ks ). The value can be incremented by 1 MB, cylinder, or block.

• Set: Displays the selected settings in the LDEV information table on the left.

• Delete

: Deletes the settings for the CVS volumes selected in the LDEV information table.

• LDEV information table: Displays the following information about the CVS volume settings:

• No.:CVSvolume'ssettingnumber.

• Emula

tion:CVSvolume'semulationtype.

• Capacity: CVS volume's capacity displayed in the unit selected from the Capacity Unit list.

• Available LDEVs: Number of LDEVs that can be created in the VDEV. The maximum is 512 LDEVs

for RA

ID5 (7D+1P) or RAID6 (6D+2P), and 256 LDEVs for other RAID levels.

• Next: Displays the Install CV pane (2).

• Cancel: Cancels the selected settings and returns to the Customized Volume pane.

180

Custom Volume Size operations