SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

NOTE:

If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group that

consists of one or more external LUs.

NOTE:

If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group that

consists of one or more virtual volumes (V-VOLs).

• Emulation: Emulation type of the CVS volume to be created (OPEN-V).

• Capacity:CVS

volume's capacity displayed in the unit selected from the Capacity Unit list in

the Make Volume pane (1).

• CU:LDEV: CU:LDEV number of the CVS volume to be created.

NOTE:

If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more

information

about external LUs, see the

HP StorageWorks External Storage XP user guide

NOTE:

If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume (V-VOL). For

more information about virtual volumes, see the

HP StorageWorks Snapshot XP user guide

• Back: Returns to the Make Volume pane (2) or Make Volume pane (3).

• OK: Registers the Make Volume settings, and returns to the Customized Volume pane.

• Cancel: Cancels the Make Volume settings, and returns to the Customized Volume pane.

Volume Initialize pane (1)

Use this pane to initialize CVS volumes other than OPEN-V.

Figure 102 Volume Initialize pane (1)

This pane has the following features:

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

193