SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Table 41 Set SSID tree icons (Volume Initialize)

Icon

Description

CU number is not

extracted.

CU number is extracted.

LDEV boundary area.

• Set SSID table: Used to set the SSID boundary area.

• CU: CU number containing an LDEV boundary with no SSID.

• LDEV Boundary: Boundary area of an LDEV number with no SSID.

• SSID:Speciﬁ ed SSID. The default is blank.

• Input SSID: Used to select or enter the SSID. You can enter the SSID only when you log in as a

storage administrator.

• SSID number of another SLPR is used: When selected, you can select the number of an SSID that

does not exist in the SLPR to which the parity group does not belong. When cleared, you can

select only the number of the SSID in the SLPR to which the parity group belongs.

NOTE:

The SSID number of another SLPR is used check box appears only when you log in as a storage

administrator and when there are two or more SLPRs.

NOTE:

You cannot enter the number in the Input SSID list when the SSID number of another SLPR is used

check box is cleared.

• Set: Sets the SSID you select or enter in the Input SSID list to the Set SSID table. The Set SSID

table displ

ays the new SSID.

• Back: Cancels the SSID setting, and returns to the Volume Initialize pane (1).

• Next: Opens the Volume Initialize pane (3) (conﬁrmation pane).

• Cancel:Re

turns to the Customized Volume pane.

Volume Initialize pane (3)

Use this pane to conﬁrm the settings of the CVS volumes to be initialized.

196

Custom Volume Size operations