SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure104VolumeInitializepane(3)forconﬁrming Volume Initialize settings

This pane has the following features:

• CVS volume-setting information table: Displays a list of the CVS volumes to be initialized.

• VDEV: VDEV number for the CVS volume to be initialized.

NOTE:

If a VDEV number starts with E (for example, E1-1-(1)), the VDEV belongs to a parity group that

consists of one or more external LUs.

NOTE:

If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity group that

consists of one or more virtual volumes (V-VOLs).

• Emulation: Emulation type of the CVS volume to be initialized.

• Capacity: Capacity of the CVS volume to be initialized, either in MB for open-system volumes

or cylinders (Cyl) for mainframe volumes.

• CU:LDEV: CU:LDEV number of the CVS volume to be initialized.

NOTE:

If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more

information about external LUs, see the

HP StorageWorks External Storage XP user guide

NOTE:

If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume (V-VOL). For

more information about virtual volumes, see the

HP StorageWorks Snapshot XP user guide

• Back: Returns to the Volume Initialize pane (1) or Volume Initialize pane (2).

• OK: Registers the Volume Initialize settings, and returns to the Customized Volume pane.

• Cancel: Cancels the Volume Initialize settings, and returns to the Customized Volume pane.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

197