SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 106 Format All pane

CAUTION:

The Format A

ll panel does not display virtual volumes.

• Parity Group Type:Usedtospecifyvolumestobeformatted.

• All Type: Blocked volumes in all parity groups in the local and external arrays are formatted.

• Internal PG: Blocked volumes in all parity groups in the local array are formatted.

• External PG: Blocked volumes in all parity groups in the external array are formatted.

• List: Displays information about volumes to be formatted.

• PG: Parity groups containing the volumes to be formatted.

• Blocked Count: Number of blocked volumes to be formatted.

• OK: Applies the Format All pane settings to the Customized Volume pane, and closes the Format

All pane.

NOTE:

After you click OK,thetreeintheCustomizedVolumepanedisplaysVDEVsimmediatelybelow

parity groups containing volumes to be formatted.

• Cancel: Cancels the settings, and closes the Format All pane.

Write to Control Blocks pane

Use this pane to make external mainframe volumes usable. This pane overwrites control blocks in external

LU in the speciﬁed external LU group. Control blocks contain information used for managing volumes.

CAUTIO

Operat

ions in this pane must be performed only on external LUs with data areas that are zero-formatted.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

199