HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

• Specify capacity and number
• Divide free space by number
• Divide free space by capacity
• Set remaining space as volume.
NOTE:
IftherearetwoormorefreespacesintheVDEV,Divide free space by number, Divide
free space by capacity,andSet remaining space as volume are not available.
c. Specify the CVS volume's capacity or the number of CVs according to the selected method. For
example:
•IfyouselectSpecify capacity and number, enter the capacity (either in MB, Cyl, or
blocks) selected in the Capacity Unit list and the number of CVs in Capacity and
Number,respectively.
•IfyouselectDivide free space by number, enter the number of CVs in the Number box.
•IfyouselectDivide free space by capacity, enter the capacity in the Capacity box.
•IfyouselectSet remaining space as volume,gotostep6.
NOTE:
The Install CV function allocates CVS volumes in the order in which the function finds
sufficient free space for the CVS volumes. For optimum space allocation, allocate CVS
volumes in descending order of capacity.
d. Click Set to display the setting in the LDEV Information table. To remove CVS volume settings
displayed in the LDEV Information table, do the following:
•Toremove
a setting, select the CVS volume, and click Delete.Whenaconfirmation
message appears, click OK.
• To remove all settings, click Clear.Whenaconfirmation message appears, click OK.
e. To create
other CVS volumes, repeat step 4a through step 4d. After setting all CVS volumes, go
to step 6.
5. From the Install CV pane (1) for other than OPEN-V, do the following:
a. In the Em
ulation Type list, select the emulation type.
b. In the Capacity box, enter the capacity of the CVS volume you want to create, either in MB or
blocks for open systems or in cylinders (Cyl) for mainframe volumes. The available capacity
range (
minimum - maximum) appears on the right of the Capacity box. The value can be
increm
ented by 1 MB or block for open systems or by 1 Cyl for mainframe systems.
NOTE:
The Ins
tall CV function allocates CVS volumes in the order in which the function finds
sufficient free space for the CVS volumes. For optimum space allocation, allocate CVS
volumes in descending order of capacity.
c. Click Set to display the setting in the LDEV Information table. To remove CVS volume settings
displayed in the LDEV Information table, do the following:
• To remove a setting, select the CVS volume, and click Delete.Whenaconfirmation
message appears, click OK.
• To remove all settings, click Clear.Whenaconfirmation message appears, click OK.
d. To create other CVS volumes, repeat step 5a through step 5c. After setting all CVS volumes, go
to step 6.
6. Click Next. The Install CV pane (2) appears.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
203