SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 17 NAS folder

Table 8 NAS port icons

Icon

Status

You can assign paths from this NAS port to logical volumes.

You cannot assign paths from this NAS port to logical volumes because of a hardware failure

or another reasons.

When you double-click a NAS port, the following host groups appear:

• NAS-Sys: When selected, information about paths to system LUs appears in the list on the right.

Thelistcontentsaregrayedoutandcannotbechanged.

The group number (G-ID) of this host group is 00.

• User: When selected, information about paths to user LUs appears in the list on the right.

The group number (G-ID) of this host group is 01.

iSCSI folder

If you double-click the iSCSI folder, iSCSI ports in the array appear as icons. The port name and attribute

appear on t

he right of each icon.

NOTE:

• The iSCSI folder does not appear if the array does not contain iSCSI channel adapters.

• iSCSI port

salwayshavetheTargetattribute.

LUN Manager panes