HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 18 iSCSI folder
Table 9 iSCSI port icons
Icon
Status
LUN security
is not applied to the port.
LUN security is applied to the port
When you double-click an iSCSI port in the tree, a list of iSCSI targets ( ) appears. The iSCSI target's
group number (G-ID), name, and host mode appear on the right of this icon. For more information
about host modes, see Table 16.
When you double-click an iSCSI target in the tree, a list of host bus adapters (
) appears. The host bus
adapter's nickname and iSCSI name appear on the right of this icon.
NOTE:
Host bus adapters areadapterscontainedinhostcomputersandareusedasportsforconnecting
hosts and th
earray.
When you double-click a port to which LUN security is not applied to display a list of iSCSI targets, iSCSI
targets except for the firstgroup(thatis,iSCSItarget0)aregrayedout.
LU Path table
A table appears on the right side and displays LU path information about the host group selected
in the tree.
• LUN: LUNs assigned to logical volumes. LUNs (logical unit numbers) are addresses assigned to
logical units (LUs), which are logical volumes that open-system hosts can access. If no paths are
defined, the other columns on the right are blank.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
63