HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)
Figure 19 WWN
name table
• Port:Listofports.Theport'sfibre address appears on the right of the port name.
• Host Group: Host groups that are used to classify server hosts connected to the array. You must
create host
groups in the LUN Manager pane.
• Name: Host bus adapter's nickname. You can specify nicknames in the LUN Manager pane.
• WWN: Host bus adapter's World Wide Name.
iSCSI name table
Lists host bus adapters connected to the iSCSI ports on the array.
Figure 20 iSCSI name table
• Port:Li
st of ports.
• Target name: iSCSI targets are used to classify server hosts connected to the array. You must
create iSCSI targets in the LUN Manager pane.
• Name:H
ost bus adapter's nickname. You can specify nicknames in the LUN Manager pane.
• iSCSI name: Host bus adapter's iSCSI name.
LDEV table
Lists logical volumes in the array.
• CU:ListofCUimages.
• LDEV: Logical volumes. The CU image number appears on the left of the colon. The LDEV number
appears on the right of the colon. The combination of a CU image number and an LDEV number
identifies a logical volume.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
65