SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

ThefollowingproceduredescribeshowtocreateiSCSItargets.Theprocedureforregisteringhoststoan

iSCSI target is described in Registering hosts in host groups.

1. Start LUN Manager. The LUN Manager pane (Figure 15) appears.

2. Right-click the port for which you want to create an iSCSI target, and select Add New iSCSI Target.

The Add New iSCSI Target pane appears.

Figure 37 Ad

d New iSCSI Target pane

3. In the Target name box, enter the iSCSI target name.

In the Target name box, the initial value in iqn format appears as a default value. iSCSI target names

must be speciﬁed in either of the following formats:

• eui format:

An IEEE 64-

bitExtendedUniqueIdentiﬁer used to specify an iSCSI name. The iSCSI name

begins with eui. and is followed by the ID found by the vendor in EUI-64 format similar to the

World Wide Name.

Example:

eui.02004567A425678D

• iqn format:

The iSCSI Qualiﬁed Name format used to specify an iSCSI name. For more information about

specifyi

ng iSCSI names using this format, see the iSCSI-related documentation.

If a host i

s connected to an iSCSI port, LUN Manager automatically displays the iSCSI name in

iqn form

at. iSCSI names can include 0 (zero) to 9, and a to f (letters are case-insensitive).

Example: iqn.2006.01.com.hp:iscsi-r500:model-xxx:sn-xxxxxx:lun00

The length of an iSCSI name must be 20 characters in eui format, and up to 223 characters in iqn

format. iSCSI names can include letters, numbers, periods (.), hyphens (-), and colons (:); but cannot

include

double-byte characters. iSCSI names are case-insensitive.

4. In the Target alias box, enter the iSCSI target's alias.

iSCSI target aliases can include letters, numbers, periods (.), hyphens (-), and colons (:); but cannot

include

double-byte characters. iSCSI target aliases are case-sensitive. An iSCSI target alias can

consis

tofupto32characters

5. In the Host Mode list, select a host mode. When selecting a host mode, you must consider the

platform and other factors (for more information, see Table 16).

CAUTION:

Do not select Reserve from the list. Reserve indicates that the host mode is not currently

supported.

6. If necessary, click Option, and select host mode options. For more information about host mode

options, see Table 17.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200