SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 43 Information about LU paths to be deﬁned (Fibre Channel environment)

Figure 44 Information about LU paths to be deﬁned (iSCSI environment)

5. Click OK. Settings are shown in the LU Path table, but not applied to the array yet.

6. Click Apply.Aconﬁrmation message appears.

7. Click OK. Settings are applied to the array, and LU paths are deﬁned.

Changing or viewing LU path settings

Deleting LU paths

CAUTION:

• Do not remove LU paths when host I/O is in progress.

• Before deleting a path to a NAS user LU, you must release the device ﬁle for the user LU if the device

ﬁle is already reserved as the copy destination of a ﬁle system. For more information about releasing

and reserving a device ﬁle, see the

NAS Backup Restore User's Guide

1. Start LUN Manager. The LUN Manager pane (Figure 14 or Figure 15) appears.

2. In t

he tree, double-click a port. Host groups or iSCSI targets corresponding to that port appear.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200